Boat Leveler 12" x 8" Trim Tab Set


SKU : N128000

UPC :


$511.99
Add to wishlist
Features:

Wiring
  • Color-coded wiring in 25' to 40' lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy.

Solenoids
  • They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.

Motor
  • A powerhouse with coated wirings and a thermal overload that resists temperature and amperage build-up. 1 3/4" stack windings and top mounting eliminated oil leakage. The motor is mounted with stainless steel nuts and bolts, and is easily disassembled.

Brackets
  • Swivel type brackets allow cylinders to be mounted an adjusted to any angle. Knockout pins act as shear pins it tab strikes an object.

Pump
  • Designed and engineered exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance held to .00025. Amperage doesn't exceed 16 because the unit circulates oil, rather than stalling out or trying to pump additional pressure.

Motor Cover
  • 4 1/2" D x 6" W x 11"H, high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. Our cover protects the motor from occasional wash down.

Cylinders
  • Impact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage.
    A stainless steel spring retracts the cylinder when the boat is not in motion.

Trim Tabs
  • 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most spray and can be used for transom or bottom mounting.

Hose
  • Designed and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 15' of hose is supplied for your system. Entering the transom 6" above the water line, the hoses are held securely with hose trim.
    Stainless steel clamps hold the hose to barb fitting at the solenoid.

Rocker Type Controls
  • Mounted on the dash they are easy to operate. 2TP Micro switch with silver contact points adjust the tabs for maximum control and performance.


One pint of Insta-Trim biodegradable transmission oil, funnel and mounting hardware is supplied.


Return Policy

Products returned for a refund must be in brand new and re-sellable condition and contain all original parts and packaging. Trolling motors in brand new, unused, uninstalled condition may be returned or exchanged within 30 days of purchase, but are ineligible for return once installed / placed / used in the water. Returns are subject up to a 25% restocking fee plus the actual cost of shipping. This amount will be deducted from the amount of your refund. We do not take single item returns $30.00 or less.   

 

Factory Serviced items are exchangeable for a replacement of the same model on defective items only within 30 Days from date of purchase.   

 

Due to overwhelming piracy on software including DVDs, CDs, and Pre-Loaded Data Cards, the manufacturer has stated that these items cannot be returned back to FactoryOutletStore.com. For any issues concerning the software (i.e. Defect, Troubleshooting, etc.), the customer is responsible for contacting the manufacturer directly for assistance.     

 

All returns or exchanges missing or with damage to the original box may be refused or may be subject to a 25% penalty fee (i.e. missing/damaged UPC barcodes, missing/damaged manuals, missing/damaged warranties, tape on the manufacturer’s box, etc.). Ship all returns using a traceable shipping method and a separate shipping box. DO NOT put any courier labels on the manufacturer's merchandise packaging. Doing so requires Cheapest Outdoors to pay for replacement packaging. Therefore, additional fees will be charged under these circumstances.       

 

We will not accept items back unless they are returned with the manufacturer's original packaging.         

 

Cheapest Outdoors is not liable in any way for returned packages that were lost or damaged during shipment.          

 

Return Authorization Number

RETURNS WILL NOT BE ACCEPTED WITHOUT A VALID RETURN AUTHORIZATION NUMBER (RMA). You may request a Return Authorization Number (RMA) within 30 Days of the original purchase date. RMA numbers expire after 30 Days, but we encourage you to return the product as soon as possible. Any return we receive without a valid RMA number will be documented and rejected or subject to a restocking charge at Cheapestoutdoors.com sole discretion. Please write to us at support@cheapestoutdoors.com to get your return started and processed.

 

NOTE: Due to the fact that Cheapest Outdoors ships from different warehouses around the country to expedite your shipping time, the address on your packing slip may NOT be the correct address for handling returns and exchanges. Customer MUST get a Return Merchandise Authorization (RMA) from one of our representatives to return their product.

 

Please include a copy of your receipt along with a description of all problems you had with the packaged components. You should choose a courier that provides tracking and insurance for your package. We do not reimburse shipping and handling costs incurred by Cheapest Outdoors while processing your order, or any shipping costs the customer incurs while returning or exchanging your purchase.

Cheapest Outdoors Inc. will not accept return of or issue credit for the following items (including, but not limited to):

  • Firearms
  • Body Armor
  • Defense/Pepper Spray
  • Items that are labeled ‘Discontinued’ by our vendors-regardless of disposition by the manufacturer
  • Undergarments (including but not limited to: underwear, socks, t-shirts, base layers)
  • Batteries
  • Gloves
  • Personal Communications Products (Including Code Red Headsets Products)
  • Headwear
  • All PDU Apparel (Professional Dress Uniform)
  • Firearms Component Kits and Parts
  • Ammunition
  • Product with retail price marking of any type
  • Opened packages or packages showing evidence of tampering
  • Product not in original packaging, including case pack goods
  • Forensic testing supplies, equipment or drug and or alcohol testing kits
  • First aid or trauma treatment products
  • Worn or shopworn products
  • Any special order products (including but not limited to): specific apparel fits, vehicular modification or customization products, special sidearm holsters or carriers, any apparel with custom embellishment, any hard goods requiring special embellishment, any product purchased for fulfillment of agency purchase order.

Recently Viewed Products