Shaft Diameter: 1"
Stern Tube Diameter (D): 2"
Total Length (A): 6.975"
Total Length (compressed) (Compressed A): 6.225"
Rotor Diameter (B): 2.375"
Carbon Cuff Diameter (C): 2"
Stern Cuff Length (E): 1.5"
The PSS Shaft Seal is the number one selling marine mechanical seal worldwide and is installed as standard equipment by many of the worlds most reputable boat builders / yards. The PSS Shaft Seal is also recognized as the premiere retrofit (aftermarket) seal on the world market. Certified by Bureau Veritas, ABS & Rina: Boat builders / yards recognize the advantages and value of installing the PSS as it eliminates the maintenance, constant adjustment & cost associated with traditional packing type glands. Aside from these benefits, the PSS Shaft Seal helps to eliminate water in the bilge (100% water tight) & wear to the propeller shaft. The PSS Shaft Seal can be easily retrofitted and is available for shafts ranging from 3/4" (20mm) to 6" (150mm).
The PSS Shaft Seal is a mechanical face seal that is created between the flat surfaces of the rotating stainless steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the vessels stern tube with hose clamps and the carbon flange is attached to the front side of the bellows with hose clamps. The stainless steel rotor is fit on the shaft in front of the carbon flange. The stainless steel rotor is used to compress the bellows before the collar is secured to the shaft with set-screws. This compression (pre-load) maintains contact between the faces and allows the PSS to compensate for the thrust from the propeller. The carbon flange is bored larger than the shaft diameter allowing it to "float" around the shaft and thus compensate for most misalignment and vibration problems. The stainless steel collar is sealed to the shaft by two o-rings that are recessed into the bore of the collar. These o-rings rotate with the shaft and stainless steel rotor and do not experience wear during operation.
**As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests as preventative maintenance that the PSS bellow be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced."
Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings, five (5) set screws, four (4) new hose clamps and an allen key.
Products returned for a refund must be in brand new and re-sellable condition and contain all original parts and packaging. Trolling motors in brand new, unused, uninstalled condition may be returned or exchanged within 30 days of purchase, but are ineligible for return once installed / placed / used in the water. Returns are subject up to a 25% restocking fee plus the actual cost of shipping. This amount will be deducted from the amount of your refund. We do not take single item returns $30.00 or less.
Factory Serviced items are exchangeable for a replacement of the same model on defective items only within 30 Days from date of purchase.
Due to overwhelming piracy on software including DVDs, CDs, and Pre-Loaded Data Cards, the manufacturer has stated that these items cannot be returned back to FactoryOutletStore.com. For any issues concerning the software (i.e. Defect, Troubleshooting, etc.), the customer is responsible for contacting the manufacturer directly for assistance.
All returns or exchanges missing or with damage to the original box may be refused or may be subject to a 25% penalty fee (i.e. missing/damaged UPC barcodes, missing/damaged manuals, missing/damaged warranties, tape on the manufacturer’s box, etc.). Ship all returns using a traceable shipping method and a separate shipping box. DO NOT put any courier labels on the manufacturer's merchandise packaging. Doing so requires Cheapest Outdoors to pay for replacement packaging. Therefore, additional fees will be charged under these circumstances.
We will not accept items back unless they are returned with the manufacturer's original packaging.
Cheapest Outdoors is not liable in any way for returned packages that were lost or damaged during shipment.
Return Authorization Number
RETURNS WILL NOT BE ACCEPTED WITHOUT A VALID RETURN AUTHORIZATION NUMBER (RMA). You may request a Return Authorization Number (RMA) within 30 Days of the original purchase date. RMA numbers expire after 30 Days, but we encourage you to return the product as soon as possible. Any return we receive without a valid RMA number will be documented and rejected or subject to a restocking charge at Cheapestoutdoors.com sole discretion. Please write to us at firstname.lastname@example.org to get your return started and processed.
NOTE: Due to the fact that Cheapest Outdoors ships from different warehouses around the country to expedite your shipping time, the address on your packing slip may NOT be the correct address for handling returns and exchanges. Customer MUST get a Return Merchandise Authorization (RMA) from one of our representatives to return their product.
Please include a copy of your receipt along with a description of all problems you had with the packaged components. You should choose a courier that provides tracking and insurance for your package. We do not reimburse shipping and handling costs incurred by Cheapest Outdoors while processing your order, or any shipping costs the customer incurs while returning or exchanging your purchase.
Cheapest Outdoors Inc. will not accept return of or issue credit for the following items (including, but not limited to):
- Body Armor
- Defense/Pepper Spray
- Items that are labeled ‘Discontinued’ by our vendors-regardless of disposition by the manufacturer
- Undergarments (including but not limited to: underwear, socks, t-shirts, base layers)
- Personal Communications Products (Including Code Red Headsets Products)
- All PDU Apparel (Professional Dress Uniform)
- Firearms Component Kits and Parts
- Product with retail price marking of any type
- Opened packages or packages showing evidence of tampering
- Product not in original packaging, including case pack goods
- Forensic testing supplies, equipment or drug and or alcohol testing kits
- First aid or trauma treatment products
- Worn or shopworn products
- Any special order products (including but not limited to): specific apparel fits, vehicular modification or customization products, special sidearm holsters or carriers, any apparel with custom embellishment, any hard goods requiring special embellishment, any product purchased for fulfillment of agency purchase order.